iDROP ICW ADIABATIC SYSTEM
How does the iDrop System work?
The iDrop Adiabatic System works by cooling the ambient air through an evaporative pad to 95% relative humidity. Thanks to this, an air temperature similar to a wet thermometer is obtained. Once this air has cooled and saturated, the cools the Condenser or Air Cooler batteries. The flow goes through the cellulose panels and, in this way, the temperature of the circulating air is lowered.
Adiabatic cooling can be defined as the psychometric process of supplying water to an air mass. The latent heat to evaporate the water is robbed of the sensible heat of the air and is cooled in this way . p >
Advantages of the iDrop Adiabatic System
Evaporative panel humidifiers have continuous control of the humidification output. For this reason, efficiencies of 75 to 95 percent are obtained to achieve a relative humidity of 80 percent. They achieve chilled water temperatures equal to those obtained by evaporative condensing towers and also obtain a consumption of 90% lower than these. span >
With this system, no water treatment is required, and no aerosols are produced. Nor are water recirculation pumps used and t all the supplied water evaporates into the air without excess.
Features < strong> of the iDrop Adiabatic System
The installed high performance condensing coils can be built in 5/8 “copper tube and 0.4mm. thickness or stainless steel of 5/8 “AISI 304L of 0.8mm. of thickness. They have corrugated aluminum fins with a separation of 2.1mm. On the other hand, the frame, which is made of riveted galvanized sheet metal, is provided with a floating system Thanks to which possible tube breaks due to vibrations or dilations are avoided. A system of collectors with loading shells ensures that the installation is free of leaks.
Its axial fans have high-performance projection grilles. In addition, the fans are equipped with 400V / 50hz three-phase motors with 910mm. diameter. External rotor with IP-54 protection degree of double speed and low consumption, in compliance with ErP regulations.
The evaporative panels are from the prestigious Munters brand and are characterized by being panels of great duration, simple cleaning and easy maintenance .
The possibility of modifying these equipment is offered through a series of options that can be consulted in the downloadable brochure from this page . Among other options, anticorrosive treatments can be applied, other types of materials can be used in the manufacture of the fins, different models of fans can be mounted, etc.
It is thus achieved that these devices become a safe and economical alternative to other products offered in the current market , in addition to saving water and energy they provide.
Committed to the environment
C/ Cadmio nº 16, 28500 Arganda del Rey, Madrid (España)
Tel: +34 91 875 74 90
Fax: +34 91 875 74 94