COMMERCIAL CEILING UNIT COOLERS

Applications and models

Intersam commercial ceiling evaporators are flat in shape, low in height, and are placed primarily on chamber ceilings. Its double air distribution achieves optimum air distribution throughout the interior of the enclosure. The range is made up of three main series, depending on whether it is used for high (IPA), medium (IPM) or low temperature (IPB).

Commercial ceiling unit coolers features

As for its high-performance evaporator coils, they are built in 1/2 ”fluted copper tube and with corrugated aluminum fins, with 3.5 spacings. , 6 and 8mm.

On the other hand, the frame is made of sheet aluminum and is provided with protective collars. It has a Venturi type production system for the application of thermostatic expansion valves.

Regarding their external structure, they are manufactured in aluminum painted in high resistance RAL-9018 polyester color. The entire structure is compact and highly rigid, thus avoiding vibrations. All its parts are easily removable for maintenance.

These units are fitted with helicoidal fans with high performance protection grids and are fitted with 315 or 350mm diameter motors. Single-phase for 230V 50Hz, with degree of protection IP-54, with external rotor and low consumption. All motors are connected to a general watertight box, according to IP-55 regulations.

Finally, defrosting is carried out with 230V electric resistances built in armored stainless steel tube that are inserted inside the battery and the tray. These resistors avoid derivations thanks to their vulcanized ends and are connected to a watertight junction box.

All models in this range can be supplied with defrosting heaters.

Options

We provide you with a wide variety of options when configuring these series. These options allow, for example, modifying the coil fins and tubes, applying anti-corrosion treatments when the installation conditions require it, etc.

As for defrosting, you can opt for an electric defrost on battery and on a tray, by hot gas in battery with resistance in a tray, but you can also opt for a defrosting with an insulated drain tray.

In the downloadable brochure on this page, you can see in more detail all these and other options that affect fans and equipment valves.

All options to be included in the equipment must be made upon request and under the prior study of the technical department of Intersam .